Google Games

Non-Stop Gaming. Non-Stop Masti..

Thanks For Visiting Google Games , The largest information site on the internet about WhatsApp and Computers. If you have any problem , Feel free to contact us at - info@googlegames.org

18 March 2017

How to Hack or crack Wi Fi Using Android Phone 2017 in English

Here I am going to give you 2 best method for hack your friends or any other wifi connection using your android device.
 
1) Hacking wap 2 securiy method

2) Hacking wep security method
Note:Please this is make sure that Not every Android phone will be able to crack the wifi pass. So for your kind information dear friends your android  device must have a Broadcom bcm4329 or bcm4330 wireless chipset, and this is also make sure your android phone must be rooted in proper way.The Cyanogen ROM will provide the best chance of success. Some of the known supported devices include:


  •  Nexus 7

  •  Galaxy Ace/S1/S2/S5

  •  Nexus OnE

  • Desire HD



Method 1 : Hacking Of WPA2 WPS Routers


Step:1)  first of all you need to root your android device or tablet .Kindly refer this given tutorial  for root your device"how to Root your android device in one click" If it is not work for your android device try "another tutorial for root your android phone"  I think you are able to root your android device.(tutorials of android rooting is provided by EXTRATIPSTRICK.COM).

Step:2) now the next step is to  Download  bcmon tool for your android device  you can download it from here  and install it properly.
 
step:3) when you install bcmon in your device ,start the app and click on the " monitor mode" tab .Your device must be rooted in order to run  bcmon.
Note: If bcmon prompted and says install the firmware and tools to your device. Tap the "Enable Monitor Mode" option. If the app crashes, open it and try again. If it fails for a third time, your device is most likely not supported.

Step:4)  Now if you successfully install bcmon now this time you need  another application Reaver you can download it from here .The use of  Reaver tool is  to crack the WPS PIN in order to retrieve the WPA2 passphrase.


Step:5) when you download reaver apps simply  Launch Reaver and  Tap the Reaver for Android icon in your App drawer. After confirming that you are not using it for illegal purposes, Reaver will scan for available access points. Tap the access point you want to crack to continue.You may need to verify Monitor Mode before proceeding. If this is the case, bcmon will open again.The access point you select must accept WPS authentication. Not all routers support this.
  
Step: 6) Verify your settings and also make sure that you have checked the " Automatic Advanced setting " box .
Step:7) now lets Start the cracking process for this Tap the "Start attack" button at the bottom of the Reaver Settings menu.cracking WPS can take anywhere from 2-10 + hours to complete, and it is not always successful try next time if you have not get  success.

Method 2 :Hacking Of  WEP Routers


Step:1)  first of all you need to root your android device or tablet .Kindly refer this given tutorial  for root your device"how to Root your android device in one click" If it is not work for your android device try "another tutorial for root your android phone"  I think you are able to root your android device.

Step:2) Now Download and install bcmon tool . its essetial because it helps monitor mode on your brodcom chipset that helps in the pin cracking.
  
Step:3) when you install bcmon in your device ,start the app and click on the " monitor mode" tab .Your device must be rooted in order to run  bcmon.
Note: After installing the APK file, simply run the app. If you see a promt message for installing the firmware and tools then simply you need to Tap the "Enable Monitor Mode" option.In case If the app crashes automaticaLly don't worry open it again and again. If again app crashes then your device is not supported by the app

Must read:





Step:4) After that tap the "Run bcmon terminal " button and type " airodump-ng " (without quotes) and hit enter once the airodump loads finish,you would be directed to the prompt command in which you are to type " airodump-ng wlan0 " ( without quotes) and again tap enter button

Step:5)  in this stage a mac address would appear ,in which you are to jot down
 
Step: 6) now this time to scan channel by collecting information from the access point before attempting to crack the password for this type the following command

" airodump-ng -cchannel#--bssid MAC address-w output ath0 "

and hit enter ,it would start scanning and search till you get  20000-30000 packets .. Be sure to plug it in if you are running low on battery.
 
Note: 

  • a)  Replace channel# with the channel number the access point is broadcasting on (e.g. 6).

  • b)  Replace MAC address with the MAC address of the router (e.g 00:0a:95:9d:68:16)


Step:7) Now you have almost crack password ,to finally crack the password return to the terminal ,but this is make sure you have reached the suitable number of packets then type " aircrack-ng output*.cap " and tap enter to the terminal.
 
Step:8) Once you found cracked password successsfully ,you would recieve a alerting message that is  " key found " and display the key in hexa-desimal form like 14:54:26:98:24.
 
Step:9 )  Now remove dot(.) from hexadesimal form and get your cracked password which looking like bellow formate

1454269824

that's it you have cracked wifi successfully.
I hope you enjoy this article if you like it pleas share it with your friends or social networking sites like facebook , google+, twitter etc.

No comments:

Post a Comment

Please make a comment

Adbox